199
11.2 Cleaning the Machine
2 Narrow Glass Strip Cover
5.
Close the chute cover.
6.
Close the document glass cover.
Cleaning the Document Feeder Rollers
When the document feeder rollers become dirty, this could result in paper jams, and in spots or
stains appearing on copies, faxes and scans.
To ensure clean output results at all times, perform cleaning about once a month.
Important
Do not use chemicals such as benzine or thinner. Doing so may damage the paint or coating on plastic
parts.
When the exterior gets too much wet, the machine may break down, or documents may be torn while
copying, faxing, or scanning.
1.
Pull up on the handle on the lefthand side cover (upper cover) of the Document Feeder, and open
it to its fullest extent.
2.
Gently clean the rollers and pads with a cloth dampened with a small amount of water.
Important
Use only water or neutral detergent, and never use other solutions.
Use a cloth firmly wrung to prevent water drops from falling into the machine. If water gets into the
machine, it may cause the machine to malfunction.
Note
When stains cannot be removed easily, wipe lightly with the soft cloth slightly moistened with a thin
neutral detergent solution.
