145
9.14 [Advanced Settings]
[Symbol Set]
Specify the default symbol set.
[Font Size]
Specify the font size for scalable typographic fonts.
[Font Pitch]
Specify the font pitch for scalable mono spaced fonts. Font pitch refers to the number of characters
printed in one horizontal inch.
[Form Line]
Specify the number of prints to be made of each page. Line spacing is configured based on [Output
Size] and [Original Orientation]. Specify paper size and document orientation in advance.
[Quantity]
Specify the number of copies to print.
Note
For a specific job, set the quantity from the print driver. Values selected from the print driver always
override values selected from the operator panel.
[Image Enhance]
Specify whether to enable the image enhance feature. Enabling this feature makes the boundary line
between black and white smoother to decrease jagged edges and enhance the visual appearance.
[Hex Dump]
All data sent to the machine is printed in hexadecimal and representation, facilitating
troubleshooting analysis. Control codes are not executed.
[Draft Mode]
Specify whether to save toner when printing. The print quality is lower when compared to normal
printing.
[Line Termination]
Specify whether to add line termination commands.
[Output Color]
Select the color mode.
[Ignore Form Feed]
Specify whether not to print the blank pages without any images, and to print only the pages with
images.
[PDF Settings]
Configure the machine settings that only affect PDF files.
