Fuji Xerox DocuPrint P455 D Page 263 User Manual Download

Page: 263 / 302

Maintenance

263

Installing a Fusing Unit

Unpack a new fusing unit.

Remove the packing material from the fusing unit.

Insert the fusing unit into the printer until it clicks.

NOTE:

•

Hold both sides of the fusing unit with your hands.

•

Make sure that the fusing unit is firmly set in the slots and cannot be moved easily.

Lower the two gray levers to lock the fusing unit.

NOTE:

•

After replacing the fusing unit, initialize its life counter. For details, see

"Resetting the Counter of the Fusing Unit" on

page 271

Removing the Transfer Unit

Push the tabs on both sides of the transfer unit inward, and then lift it out of the printer.

Summary of Contents for DocuPrint P455 D














































































































































































































































































































Search results

Summary of Contents for DocuPrint P455 D

Reviews:

Related manuals for DocuPrint P455 D

Brands by name

Popular brands

Fuji Xerox DocuPrint P455 D, User Manual

Search results

Summary of Contents for DocuPrint P455 D

Reviews:

Related manuals for DocuPrint P455 D

Brands by name

Popular brands