Fuji Xerox DocuPrint P455 D, User Manual

Page: 138 / 302

138
Printing Basics
Using the lpr command
NOTE:
• For Windows Vista or later, enable the lpr command first. The following procedure uses Windows 7 as an example.
a
Click Start
→
Control Panel
→
Programs
→
Turn Windows features on or off .
b
In the Windows Features dialog box, select the LPR Port Monitor check box under Print and Document
Services .
In the command prompt, enter the lpr command as described in the following example:
Example: Printing "event.pdf" when the printer's IP address is 192.168.1.100.
Using the ftp command
In the command prompt, enter the ftp command as described in the following example:
Example: Printing "event.pdf" when the printer's IP address is 192.168.1.100.
C:\> lpr -S 192.168.1.100 -P lp event.pdf
C:\> ftp 192.168.1.100
Connected to 192.168.1.100.
220 FUJI XEROX DocuPrint XXXX
User (192.168.1.100:(none)):
331 Password required
Password:
230 Logged in
ftp> bin
200 Command successful
ftp> put event.pdf
200 Command successful
150 Opening data connection
226 Transfer complete
ftp: xxxxx bytes sent in xxxSeconds xxxxxkbytes/sec.
ftp>