Fuji Xerox DocuPrint P455 D User Manual Download Page 256

Page: 256 / 302

256

Maintenance

Installing a Toner Cartridge

Unpack a new toner cartridge.

NOTE:

•

Handle the toner cartridge carefully to avoid spilling of the toner.

Shake the new toner cartridge five or six times to distribute the toner evenly.

Make sure that the two tabs of the toner cartridge align with the grooves on the printer, and then insert it into the
printer until it clicks.

Grasp the toner cartridge lock lever, and then pull it down until it stops.

Close the front cover.

Summary of Contents for DocuPrint P455 D














































































































































































































































































































Search results

Summary of Contents for DocuPrint P455 D

Reviews:

Related manuals for DocuPrint P455 D

Brands by name

Popular brands

Fuji Xerox DocuPrint P455 D, User Manual

Search results

Summary of Contents for DocuPrint P455 D

Reviews:

Related manuals for DocuPrint P455 D

Brands by name

Popular brands