Fuji Xerox DocuPrint P455 D User Manual Download Page 111

Page: 111 / 302

Printer Connection and Software Installation

111

Enter the WEP key, and then press the

button.

Select the desired transmit key from

Auto

WEP Key 1

WEP Key 4

, and then press the

button.

The

Restart Printer to apply setting

message appears.

Proceed to step

Select

WEP

for the encryption method, and then press the

button.

IMPORTANT:

•

Be sure to use one of the supported encryption methods to protect your network traffic.

Enter the WEP key, and then press the

button.

Select the desired transmit key from

WEP Key 1

WEP Key 4

, and then press the

button.

The

Restart Printer to apply setting

message appears.

Turn off the printer, and turn it on again to apply the settings.
Wireless settings are correctly configured.

IMPORTANT:

•

If the optional hard disk unit is not installed on your printer, note that the data in the memory are cleared when the printer
is turned off.

Summary of Contents for DocuPrint P455 D














































































































































































































































































































Search results

Summary of Contents for DocuPrint P455 D

Reviews:

Related manuals for DocuPrint P455 D

Brands by name

Popular brands

Fuji Xerox DocuPrint P455 D, User Manual

Search results

Summary of Contents for DocuPrint P455 D

Reviews:

Related manuals for DocuPrint P455 D

Brands by name

Popular brands