Fuji Xerox DocuPrint P455 D User Manual Download Page 262

Page: 262 / 302

262

Maintenance

Removing the Fusing Unit

Turn off the printer, and wait for 40 minutes.

IMPORTANT:

•

If the optional hard disk unit is not installed on your printer, note that the data in the memory are cleared when the printer
is turned off.

Pull the rear door handle on the rear of the printer to open the rear door.

Raise the two gray levers on the both sides of the fusing unit to unlock.

Grasp the grips on both sides of the fusing unit placing thumb on the knurling, and then pull out the unit.

Summary of Contents for DocuPrint P455 D














































































































































































































































































































Search results

Summary of Contents for DocuPrint P455 D

Reviews:

Related manuals for DocuPrint P455 D

Brands by name

Popular brands

Fuji Xerox DocuPrint P455 D, User Manual

Search results

Summary of Contents for DocuPrint P455 D

Reviews:

Related manuals for DocuPrint P455 D

Brands by name

Popular brands