Fuji Xerox DocuPrint C1110 B User Manual Download

Page: 75 / 209

4.2 Loading Paper

4.2

Loading Paper

This section explains how to load paper in the manual feeder and tray 1.

Loading Paper in the Manual Feeder

Important

• Make sure to load paper when the power is switched on.

Note

• When loading an envelope into the manual feeder, make sure to load it correctly. For details, refer to

" Notes on Loading Envelopes" (P. 80).

Adjust the paper guides to the width of the
paper.

Important

• Make sure that the guides are positioned just lightly

against the paper. The guides that are too tight or too
loose can cause paper jams.

Hold both sides of the paper with the print
side facing down close to the manual
feeder, and push it into the printer until it
automatically feeds.

Important

• Insert the paper straight into the manual feeder slot

correctly. If the paper is not fed properly, images may
be skewed or a paper jam may occur.

• Insert only one sheet of paper at a time into the

manual feeder. Otherwise, a paper jam may occur.

Note

• If you request a print job with [Paper/Output] > [Paper Source] set to [Auto] on your print driver, the

manual feeder cannot be auto-selected by the printer. Select [Manual Feeder] from [Paper Source] on
the print driver.

• When printing from the manual feeder, set the size and type of the paper on your print driver. For more

information, refer to the online help provided for the print driver.

Summary of Contents for DocuPrint C1110 B

















































































































































































































Search results

Summary of Contents for DocuPrint C1110 B

Reviews:

Related manuals for DocuPrint C1110 B

Brands by name

Popular brands

Fuji Xerox DocuPrint C1110 B, User Manual

Search results

Summary of Contents for DocuPrint C1110 B

Reviews:

Related manuals for DocuPrint C1110 B

Brands by name

Popular brands