Fuji Xerox DocuPrint C1110 B User Manual Download

Page: 134 / 209

134

7 Maintenance

Turn the right side of the fuser unit toward
the rear of printer, and insert the right notch
into the holder inside the printer.

Close the front cover.

Important

• When closing the front cover, be careful not to get your

fingers caught between (the left, right, top, or bottom
edge of) the cover and the printer.

Resetting the Counter

If you are finished replacing the fuser unit, reset its counter on the control panel.

Press the < > and <Eject/Set> buttons
simultaneously.
[Consumables Menu] is displayed.

Press the < > button.
[Counter Reset] is displayed.

Press the < > or <Eject/Set> button to
accept the selection.
[Fuser] is displayed.

Press the < > or <Eject/Set> button to
accept the selection.
The confirmation screen is displayed.

Press the <Eject/Set> button.
The resetting of the counter starts. When
finished, the display returns to the screen
shown on the right.

Press < > button until [Ready to Print] is
displayed.

Consumables Menu
Non-genuine

Consumables Menu
Counter Reset

Counter Reset
Fuser

Fuser
Ready to Reset

Counter Reset

Fuser

Ready to Print

Summary of Contents for DocuPrint C1110 B

















































































































































































































Search results

Summary of Contents for DocuPrint C1110 B

Reviews:

Related manuals for DocuPrint C1110 B

Brands by name

Popular brands

Fuji Xerox DocuPrint C1110 B, User Manual

Search results

Summary of Contents for DocuPrint C1110 B

Reviews:

Related manuals for DocuPrint C1110 B

Brands by name

Popular brands