Fuji Xerox DocuPrint C1110 B User Manual Download

Page: 34 / 209

2 Basic Operation

Control Panel

No.

Name

Description

LCD display

Displays the status of the printer, menu options, and messages.

Refer to

• "Control Panel Display" (P. 35)

<Menu> button

Pressed to display the menu screen.

<Eject/Set> button

Pressed to confirm the menu option selected on the menu screen. This button
is used also when printing reports/lists.

<Power Saver> button/lamp

Pressed to exit the Power Saver mode (Sleep mode). This button/lamp lights
when the printer is the Power Saver mode (Sleep mode).

<Cancel Job> button

Pressed to stop printing.

>, <

button

Pressed to advance to the next menu, item, or option.
The <

> button is used also when using the Secure/Sample Print feature.

Note

• Holding down the <

> or <

> button scrolls through menus, items, and

options in a circular fashion. Pressing the <

> and <

> buttons

simultaneously displays the default values.

• To use the Secure/Sample Print feature, additional memory of 256 MB or

above (optional) must be installed.

<Error> lamp

Blinks or lights when an error occurs.

<Ready> lamp

Lights when the printer is ready to print.

Summary of Contents for DocuPrint C1110 B

















































































































































































































Search results

Summary of Contents for DocuPrint C1110 B

Reviews:

Related manuals for DocuPrint C1110 B

Brands by name

Popular brands

Fuji Xerox DocuPrint C1110 B, User Manual

Search results

Summary of Contents for DocuPrint C1110 B

Reviews:

Related manuals for DocuPrint C1110 B

Brands by name

Popular brands