Fuji Electric Time Delta-C FSV-2, Instruction Manual

Page: 24 / 149

-17-
4.2. Measurement modes
The measurement mode can be switched among 2-path, 2-pipe, and 1-path/energy measurement, by changing the
parameter. Refer to “4.7.1 Setting measurement mode and CH3 (calculation output)”.
4.2.1. Function block diagram
The configuration from signal input to output varies depending on the measurement mode.
4.2.2. Definition of the channels
In 2-path mode and 2-pipe mode, computation path from signal input to output is divided into three paths. Each computation
path can be defined by channel. In some parameter setting, you need to specify which channel you are going to set.
CH1 is assigned to the path 1 computation path from signal input to output.
CH2 is assigned to the path 2 computation path from signal input to output.
CH3 is assigned to the path of calculation.