Fuji Electric Time Delta-C FSV-2, Instruction Manual

Page: 30 / 149

-23-
Measurement mode
PAR.PROTECTION
OUTPUT SETUP
MEASURE SETUP
MAINTENANCE MODE RAS INFORMATION
CH1
CH2
CH3
COPY
OUTPUT SETTING
DO CHECK
AO1 CALIBRATION
AO2 CALIBRATION
TOTAL PULSE
TEST MODE
COMMUNICATION MODE RS-485
BAUD RATE
PARITY
STOP BIT Stop bit setting
STATION No.
PROTOCOL
Baud rate setting
Parity setting
Protocol setting
SYSTEM LANGUAGE LANGUAGE
REGISTER ID NO.
VER. NO.
*1 MEMORY INITIAL
LCD BACKLIGHT
LCD/LED CHECK
LCD/LED CHECK CH1
CH2
*1: Only for service technician
*1 DETAILS CH1 TRANS. COUNT 128 (Initial value)
TRIGGER CONTROL (Auto (Initial value))
WINDOW CONTROL (Auto (Initial value))
SATURATION 128 (Initial value)
MEAS. METHOD
(METHDD2 (Initial value))
SIGNAL BALANCE
25%(Initial value)
TRANS. PATTERN (BURST3 (Initial value))
AGC GAIN (Auto (Initial value))
SIGNAL PEEK (0.375V (Initial value))
TRANS.WAIT TIME 5ms (Initial value)
CH2
CH ALL (Set the same values for CH1 and CH2)
(Same as “CH1”)
2-pipe mode – maintenance mode