Fuji Electric Time Delta-C FSV-2, Instruction Manual

Page: 4 / 149

-iii-
Caution on maintenance and inspection
CAUTION
 The unit should be inspected every day to always obtain good results of
measurements.
 When measuring the insulation resistance between the power/output
terminal and the case, follow “Section 6.2.3. How to measure the
insulation resistance” described in this manual.
 If the fuse is blown, detect and eliminate the cause, and then replace the
fuse with a spare. If there are no spares, replace the fuse with the one
specified in this manual “Section 6.3. How to replace the fuse ” (that must
be acquired separately). Use of a fuse other than specified or its short-
circuit may cause an electric shock or fire. The fuse should be replaced
according to “Section 6.3. How to replace the fuse” described in this
manual.