Fuji Electric MONITOUCH X1 Series, Hardware Specifications

Page: 31 / 180

2 Specifications
2-10
2.4.2 SERIAL
This connector is used for serial connection with controllers.
Specifications
*1 Select the signal level on the [Hardware Setting] window of the screen configuration software or local mode on the X1 series unit.
When selecting the RS-422 (4-wire connection) signal level for connection with a controller that supports both RS-485 (2-wire connection) and RS-422
(4-wire connection), select in the local mode on the X1 series unit. Refer to
“Serial Setting” page 5-44 .
Pin numbers and signal names
* The frame ground (FG) and signal ground (SG) are connected inside the unit.
Recommended cable
AWG 26 stranded wire, braided shield
* Check the operation in advance in the usage environment.
Item Specification
Number of Ports 1
Connector RJ-45
Communication Standard
RS-232C / RS-485 (2-wire connection) / RS-422 (4-wire connection)
*1
Synchronization Asynchronous type
Data Length 7 / 8 bits
Parity None / Even / Odd
Stop Bit 1 / 2 bits
Baud Rate 4800 / 9600 / 19200 / 38400 / 57600 / 76800 / 115200bps
Applications PLC, temperature controller, etc.
LAN Pin No. RS-232C RS-485 (2-wire connection) RS-422 (4-wire connection)
1 RD Receive + Transmit/r +SD Tr
2 NC - - Transmit/receive

-SD Transmit

3 NC - NC - NC -
4 NC - NC - NC -
5 SG Signal ground SG Signal ground SG Signal ground
6 SG Signal ground SG Signal ground SG Signal ground
7 SD Transmit NC - +RD R
8 NC - NC - -RD Receive 
Bottom view
12345678