Fuji Electric MONITOUCH X1 Series, Hardware Specifications

Page: 165 / 180

6 Errors
6-2
Error Numbers
Check the contents of the error (= error number) according to the item name and sub-item number, and remove the error.
Error No. Contents Solution
3 The screen program version does not match the X1 series unit
system program version.
Update the X1 app version.
If the problem persists, check the editor version and the system program
version of the X1 series unit, and contact your local distributor.
11 The PLC model set in the screen program does not match the
I/F driver.
13 The I/F driver version does not match the version of the X1
series unit system program.
Check the I/F driver version and the system program version of the X1 series
unit, and contact your local distributor.
15 The interface language on MONITOUCH does not match the
language set in the screen program.
Check the MONITOUCH model and the language set in the created
program.
20 The maximum capacity of the logging server has been
exceeded.
The capacity of DRAM specified under [Internal Storage Setting] in the
[Logging Server] window has exceeded the maximum available capacity.
Reduce the number set for [Number of Data to Save].
22 The logging/alarm block number specified for a trend or
alarm part has not been set.
Select [System Setting]  [Logging Server] or [Alarm Server], and set the
corresponding block number again.
27* An error was found in the logging server or alarm server.
Contact your local distributor.
36* ITEM error
38* Component error
41* Recognition flag error
42* Function ITEM error
44* Group ITEM end error
46 An unavailable device memory address is set or the available
device memory range is exceeded.
Check the device memory setting.
For a system with an Ethernet connection, check the settings at [Hardware
Setting]  [Target Settings]  [PLC Table].
47 IDs of the items having setting limitations in the screen library
are duplicated on a screen.
Check the IDs and keep them unique.
49* Group ITEM error
Contact your local distributor.
50* Link ITEM error
52 The overlap ID is incorrect and must be a value from “0” to “9”. Check the overlap ID and set correctly.
53 An overlap library number with no part registered is specified
in the call-overlap setting.
Specify an overlap library number with a part registered.
56* Graphic undefined command error
Contact your local distributor.
59* Switch function error
61* Statistic graph % display No. exceeding
64* Data display element No. error
65 The scale or graph is not set correctly in the trend part
settings.
Correct the settings for [Scale Max. Value] and [Scale Min. Value] or [Graph
Max. Value] and [Graph Min. Value] in the [Detail] window.
66* Internal circle radius is “0”.
Contact your local distributor.
67* The number of points to display is equal to or smaller than
zero.
69 A pattern or frame larger than the screen size has been
specified.
Re-set the pattern or frame.
74 An animation part is placed in the area other than the base
screen (screen library, etc.).
Place the animation part on the base screen.
77* Expanded graphic ITEM error
Contact your local distributor.
78* Expanded function ITEM error
80* Macro: Undefined command error Contact your local distributor.
81 Macro: The numbers of FOR and NEXT commands are not the
same. FOR-NEXT commands are nested beyond 8 levels.
Correct the FOR-NEXT commands.
82 Macro: There are two different commands for the same label
number.
Macro: Re-set the label.
83 Macro: There is no destination label for the jump. Macro: Change or set the destination label.
84 Macro: Incorrect use of device memory Change the macro command.
Screen number: Refer to page 6-4 .
Error number: Refer to the table below.
Error: xxx (Item name: Sub-item number)
Error location