Fuji Electric MONITOUCH X1 Series, Hardware Specifications

Page: 167 / 180

6 Errors
6-4
* Error numbers with an asterisk (*) do not occur under ordinary circumstances.
If any of these errors are displayed, contact your local distributor (specified on the back cover).
Sub-item number
The sub-item number indicates the number of the screen where the error was detected.
For items that are not assigned screen numbers, the following numbers are indicated.
403 The PLC No. and model do not match between the main and
sub app settings. (sub-screen only)
Make the PLC No. and model settings match in [Hardware Setting].
404 [Multi-Display Settings] is set to "None", or
[Multi-Display Settings] is set to "Yes" and the data specified
for [Editing Screen: Main] is being transferred to the sub app.
(sub-screen only)
Transfer to the main app at [Transfer] -> [Communication Setting] ->
[Option] -> [Port No. 8001].
When transferring to the sub app,
transfer the data specified for [Multi-Display Settings] -> [Editing Screen:
Sub].
405 The PLC model specified for SERIAL does not support
multi-display. (main-screen, sub-screen)
Check the model specified for SERIAL.
Refer to the X1 Series Reference Manual for models that support the
function.
Item Name Sub-item Number
Logging server
Alarm server
Block No. 0 to 11
Message Message group No. 0 to 127
Graphic Library Graphic group No.  256 + No. in the group
Device Memory Map xyy (x = PLC1 to 8, yy = table No.)
I/F driver 1 to 8: PLC1 to 8
9: Simulator
Error No. Contents Solution