Fuji Electric MONITOUCH X1 Series, Hardware Specifications

Page: 55 / 180

4 X1 Setup Procedures
4-2
4.2 Setting Procedure (For a new unit)
For a brand new X1 series unit, the sequence from power on up to transferring a screen program is as shown below.
For detailed setting procedures, refer to the X1 Series Setup Manual.
Set [Write filter setting] to [Invalid].
System Configurator
Reboot
Turn power on.
System Configurator
“5.5 System Configurator” page 5-66
Language change
Time settings
IP address setting
Set [Startup settings (operation mode)] to [HMI].
HMI app starts.
Write filter setting: Valid
Write filter setting: Valid
Write filter setting: Invalid
* Turn the power off and reboot after
pressing the [Shutdown] button in
System Configurator.
Reboot
“Write Filter Setting” page 5-75
“5.5.8 Language Change” page 5-94
“Time Settings” page 5-82
“IP Address Setting” page 5-69
“Startup Settings (Operation Mode)” page 5-81