Fuji Electric MONITOUCH X1 Series, Hardware Specifications

Page: 87 / 180

5 Operation Method
5-28
5.4.7 WLAN Setting (Only for Wireless LAN I/F Models)
Pressing [WLAN Setting] in the menu icons brings up the WLAN Setting screen.
This screen is used to configure wireless LAN settings for the X1 series unit.
When the wireless LAN link is not established *, the [WLAN Setting] switch in the menu icons is changed as follows.
* A link is not established in the following states.
- The wireless LAN is turned off (disabled).
- The wireless LAN is turned on (enabled) but a link is not established.
- The wireless LAN is turned on (enabled) but not connected to the specified access point.
IP Setting
The [IP Setting] tab window shows the wireless LAN IP address of the X1 series unit.
For general specifications and conformance standards of wireless LAN, refer to “WLAN” page 2-14 .
Menu icons WLAN Setting screen
Link established Link not established
[IP Setting] tab window
Pressing each setting
field brings up the
system keyboard to be
used for input.
The IP address specified
on System Configurator
is displayed,
After changing any
settings, press the
[Apply] switch to
confirm the settings.