Fuji Electric MONITOUCH X1 Series, Hardware Specifications

Page: 84 / 180

5.4 Local Mode
5-25
1
2
3
4
5
6
7
8
9
10
5.4.6 LAN Setting / LAN2 Setting
Pressing [LAN Setting] or [LAN2 Setting] in the menu icons brings up the LAN Setting or LAN2 Setting screen, respectively.
This screen shows the IP address of the X1 series unit set on System Configurator.
When no LAN cable is connected or a link is not established, the indication of the [LAN Setting]/[LAN2 Setting] icon is changed as follows.
IP Setting
The [IP Setting] tab window shows the IP address and the port number setting of the X1 series unit.
Item Description
IP Address Indicates the IP address of the LAN port.
Subnet Mask Indicates the subnet mask of the LAN port.
Gateway Indicates the default gateway of the LAN port.
MAC Address Indicates the MAC address of the LAN port.
External Access Service Port Set the port number to be used for the EREAD, EWRITE, SEND, and MES macro commands and
Ethernet DLL functions.
No. 1024 to 65535 (excluding 8001)
Time-Out Set the timeout period to be used for the EREAD, EWRITE, SEND, and MES macro commands and
Ethernet DLL functions.
Retrials Fixed to “0”
Menu icon
LAN Setting screen
Link established Cable disconnected or link not established
[IP Setting] tab window
After changing any
settings, press the
[Apply] switch to
confirm the settings.
Pressing each setting
field brings up the
system keyboard to be
used for input.
The IP address specified
on System Configurator
is displayed,