Fuji Electric MONITOUCH X1 Series, Hardware Specifications

Page: 136 / 180

5.5 System Configurator
5-77
1
2
3
4
5
6
7
8
9
10
Advanced settings
Item
Description
Area to filter This setting is displayed when [Write filter setting: Invalid] is selected.
Set the writing prohibited area.
System area (default) Prohibits writing in the system area. Some areas are excluded.
Excluded areas (reading/writing enabled at all times)
• C:\MONITOUCH\X1\0 folder
• C:\MONITOUCH\X1\1 folder
• C:\MONITOUCH\X1\opcua folder
• C:\UserData folder
All areas Prohibits writing to all areas of the internal storage.
* All areas of the internal storage are writing prohibited when [Write filter setting: Valid] is
selected. Even if you change the screen program or update the file, the X1 will return to
the state before the change by turning the power off and back on again, or rebooting.
Available overlay capacity This setting displayed when [Write filer setting: Valid] is selected.
You can check the available overlay capacity. Max.1 GB
Refresh available overlay capacity Refreshes the display of available overlay capacity.
Overlay
Overlay is a mechanism to write to a RAM area instead of a write-protected area when writing occurs in that area. The overlay capacity is 1
GB, and X1 will not operate properly if there is no remaining capacity. Turn the power off and back on again, or reboot before remaining
capacity reaches "0".
The current status is
indicated in blue.
Back