Fuji Electric MONITOUCH X1 Series, Hardware Specifications

Page: 22 / 180

2.1 Specifications
2-1
1
2
3
4
5
6
7
8
9
10
2.1 Specifications
2.1.1 General Specifications
*1 Use the unit in an environment where the wet-bulb temperature is 39  C or less; otherwise the unit may be damaged.
*2 This indicates the distribution section to which the unit is intended to be connected to within the path between the distribution of the public power
network and machinery in the facility.
“Category II” applies to devices supplied with power from mains sockets or similar points. The withstand surge voltage is 500 V for devices rated up to
50 V.
*3 This is an index that expresses the degree of conductive pollution in the environment where the unit is used. “Pollution degree 2” indicates the
condition where only non-conductive pollution occurs. However, due to condensation, temporary conductive pollution may occur.
Item X1121iSD X1121iSRD X1151iSD X1151iSRD
Conformance
Standards
CE Marking EMC directive (2014/30/EU) EN61000-6-2, EN61000-6-4
RE directive (2014/53/EU) EN300 328, EN301 893, EN301 489-1, EN301 489-17, EN62311
RoHS directive
UL/cUL UL61010-1, UL61010-2-201 (E313548)
CAN/CSA-C22.2 No. 61010-1, CAN/CSA-C22.2 No. 61010-2-201
KC Conforming
UKCA Conforming Hardware version b or later.
Radio Law Non-conforming Japan: MIC
USA: FCC
Canada: ISED
Europe: RED
South Korea: KC
Taiwan: NCC
Non-conforming Japan: MIC
USA: FCC
Canada: ISED
Europe: RED
South Korea: KC
Taiwan: NCC
Power Supply Permissible Voltage Range 24 VDC  10 %
Permissible Momentary Power
Failure
Within 1 ms
Power Consumption (Maximum
Rating)
41 W or less 51 W or less
Rush Current 24 A or less, 6 ms (ambient temperature at 25

C)
Withstand Voltage DC external terminals to FG: 500 VAC for 1 minute
Insulation Resistance DC external terminals to FG: 500 VDC, 10 M  or higher
Physical
Environment
Operational Ambient Temperature 0

C to +45

C
*1
Storage Ambient Temperature
 10  C to +60  C
*1
Operational Ambient Humidity
85 % RH or less (without dew condensation)
*1
Storage Ambient Humidity
85 % RH or less (without dew condensation)
*1
Altitude 2000 m or less
Atmosphere No corrosive gas, no excessive dust, and no conductive dust
Overvoltage Category
*2
Category II
Pollution degree
*3 2
Mechanical
Working
Conditions
Vibration Resistance JIS B 3502 (IEC61131-2) compliant
Vibration frequency: 5 to 9 Hz Half-amplitude: 3.5 mm,
Vibration frequency: 9 to 150 Hz Constant acceleration: 9.8 m/s
2
(1 G), 3 directions of X, Y, and Z:
10 times each
Shock Resistance JIS B 3502 (IEC61131-2) compliant
Peak acceleration: 147 m/s
2
(15 G), 3 directions of X, Y, and Z: 3 times each (18 times in total)
Electrical Working
Conditions
Noise Resistance Noise voltage: 1000 Vp-p, Pulse width: 1

s, Rising time: 1 ns
(Measured using a noise simulator)
Static Electricity Discharge
Resistance
Compliant with IEC61000-4-2, Contact: 6 kV, Air: 8 kV
Installation
Specifications
Grounding 100  or less, FG/SG connected
Protective
Structure
*4
Panel Front
Surface
Equivalent to IP66 (when waterproof gasket is installed)
Rear Case Equivalent to IP20
Cooling System Natural cooling
Mounting Method Fitted into a mounting panel
Mounting Panel Thickness
1.5 to 4.0 mm
*5
Weight Approx. 3.2 kg Approx. 3.9 kg
Dimensions External (W  H  D) 320.0  241.0  66.7 mm 406.0  271.0  68.2 mm
Panel cut-out (W  H)
309.0  230.0 mm 395.0  260.0 mm
Case Color Black
Material Front: PBT+GF30 resin Rear: Sheet metal
+0.5

0
+0.5

0
+0.5

0
+0.5

0