Fronius TransSteel 2500c, Operating Instructions Manual

Page: 24 / 120

24
Warning notices
on the device Warning notices and safety symbols are affixed to the power sources. These warning no-
tices and safety symbols must not be removed or painted over. They warn against operat-
ing the device incorrectly, as this may result in serious injury and damage.
Safety symbols on the rating plate
Welding is dangerous. The following
basic requirements must be met:
-
welders must be sufficiently quali-
fied
- suitable protective equipment must
be used
- all persons not involved in the
welding process must be kept at a
safe distance
Do not use the functions described here
until you have thoroughly read and un-
derstood the following documents:
-
these operating instructions
- all the operating instructions for the
system components, especially
the safety rules
40,0006,3035
inside