Fronius TransSteel 2500c, Operating Instructions Manual

Page: 114 / 120

114
Appendix
Quick reference
4
1 3 2
5
Fronius International GmbH, www
.fronius.com
Keylock
Important!
If the keylock is activated, only the
parameter settings can be retrieved, as well as any assigned “Save“ button provided that an assigned “Save“ button was selected when the keylock was enabled.
-
press and hold
- press - release
activate / deactivate: activated: „CLO | SEd“ display deactivated: „OP
| En“ display
Quick Reference: English
Setting the welding power
Selecting the fi
ller metal and
shielding gas
2 T
2-step
mode
4 T
4-step
mode
S 4
T
Special 4-step mode
Selecting the process Setting the mode
MANUAL
MIG/MAG standard manual
SYNERGIC Standard
synergic
STICK
Manual metal arc welding
Correcting parameters
Important
If external system components
are connected, some parameters can be modifi
ed on those components.
The power
source control panel is only for display purposes.
01/2013
Start-up sequence Follow operating instructions
-
1
5
T
ransSteel Synergic
SP
... Special Program
-
select desired parameter
- set desired parameter
Sheet thickness W
elding current
Wire feed speed
Arc length correction W
elding voltage
Dynamic
-
select desired parameter
- set desired parameter
Real Energy Input