Version 2.6:190307-Eng
5
•
At the following screen, close your browser. Your device is pre-registered.
Connection by LAN-cable
1.
Connect the power cable of the terminal to a wall outlet.
2.
Connect a RJ-45 LAN-cable to the terminal and to your network (router/switch/firewall).
3.
Press the “MENU” button on the terminal.
- Scroll down to “System settings” using the arrows and press the “OK” button.
- Select “Communication”, and press the “OK” button.
4.
Select “Network and press “OK”.
5.
Make a note of the IP-address of the terminal (ex. 192.168.1.130)
6.
Open a browser on a computer connected to the same network as the terminal.
Type the address http:// followed by the IP-address of the terminal.
(ex. http://192.168.1.130)
7.
Follow the instructions in the browser to install the terminal.
