2.2 Scope of application
The PULVERISETTE 1 classic line is a Laboratory - jaw crusher for pre-
crushing of hard and brittle sample material from the fields of mining
and metallurgy, geology and mineralogy, chemical industry, as well as the
glass and ceramics industry.
The maximum feed size is
n
Model I 65 mm
n
Model II 100 mm
The achievable final fineness is between approx. 15 mm and 2 mm
depending on the setting.
The jaw crusher described here is production equipment for use in indus-
trial environments. The device may be used for these purposes only.
2.2.1 Operating principle
The materials are comminuted in a crushing chamber which is formed by
two support walls, an adjustable, fixed crushing plate, and an oscillating,
movable crushing plate. The oscillating crushing jaw is driven by a fly‐
wheel and a robust cam. Its special sequence of movements draws the
material to be comminuted into the crushing chamber and prevents the
crushed material from getting jammed. Crushed material exits the
crushing chamber though the adjustable output gap and is collected in
the grinding stock container.
2.3 Obligations of the operator
Before using the of the PULVERISETTE 1 classic line, this manual is to be
carefully read and understood. The use of the of the PULVERISETTE 1
classic line requires technical knowledge; only commercial use is per-
mitted.
The operating personnel must be familiar with the content of the oper-
ating manual. For this reason, it is very important that these persons
actually receive the present operating manual. Ensure that the operating
manual is always near the device.
The of the PULVERISETTE 1 classic line may exclusively be used within the
scope of applications set down in this manual and within the framework
of guidelines put forth in this manual. In case of non-compliance or
improper use, the customer assumes full liability for the functional capa-
bility of the PULVERISETTE 1 classic line and for any damage or injury
arising from failure to fulfil this obligation.
By using the of the PULVERISETTE 1 classic line the customer agrees with
this and recognizes that defects, malfunctions or errors cannot be com-
pletely excluded. To prevent risk of damage to persons or property or of
other direct or indirect damage, resulting from this or other causes, the
customer must implement sufficient and comprehensive safety measures
for working with the of the PULVERISETTE 1 classic line.
Safety information and use
- 8 -