9.3 Guide pin
The guide pin and the link pin should be removed and rubbed down with
a dry cloth, depending on how frequently the machine is used. If parti‐
cles have gotten pressed into the surface, the surfaces must be rubbed
down with steel wool.
9.4 Lubricating the bearings
Their are two grease nipples on the moveable crushing jaw which are
used for lubricating the bearings of the main shaft. To access them, the
back cover of the crushing chamber has to be removed.
These bearings have to be lubricated with roller bearing grease after
approx. 500 hours (e.g in acc. with DIN 51806) All other fitted bearings
have permanent lubrication.
Maintenance
- 45 -