36
PART-ARM 1 SETUP
The parameters in this menu control the systems Exit-
Delay period and the Entry/Exit Delay warning beeps
during Part-Arm 1 mode.
Scroll through the programming menu until
‘6. PART
ARM 1 SETUP’
is displayed and press .
Note:
After configuring Part Arm 1 press to
return to the top level programming menu.
EXIT-DELAY PERIOD
Scroll through the menu until
‘6-1 EXIT-DELAY’
(and
the current setting) is displayed.
To change the settings press .
On/Off Status
Default setting: ON
Scroll through the menu until
‘6-1-1 Status’
(and
the current setting) is displayed.
To change the setting press .
Press to enable the Exit-Delay, or
Press to disable the Exit-Delay.
Delay Period
Default setting: 30 seconds
Scroll through the menu until
‘6-1-2 Delay Time’
(and the current setting) is displayed.
To change the settings press .
Enter the required delay period (10 to 250
seconds).
Press to save and exit, or
Press to exit without saving.
Press to return to top level Part Arm 1 Setup
menu.
ENTRY-DELAY BEEPS
Allows the Entry-Delay warning beeps when activating
Part-Arm 1 to be switched ON or OFF.
Default Setting: ON
Scroll through the menu until ‘
6-2 Entry Delay Beep
’
(and the current setting) is displayed.
To change the setting press .
Press to enable the beeps, or
Press to disable the beeps.
EXIT-DELAY BEEPS
Allows the Exit-Delay warning beeps when activating
Part-Arm 1 to be switched ON or OFF.
Default Setting: ON
Scroll through the menu until ‘
6-3 Exit Delay Beep
’
(and the current setting) is displayed.
To change the setting press .
Press to enable the beeps, or
Press to disable the beeps.
6. PART ARM 1
SETUP
PROGRAM MODE
Code:
6-3 Exit Delay
Beep:
xxx
6-2 Entry Delay
Beep:
xxx
Select
ON->1
OFF->3
Select
ON->1
OFF->3
6-1 EXIT Delay
xxx xxx
s
6-1-1 Status
xxx
Select
ON->1
OFF->3
6-1-2 Delay Time
Enter (10-250s)
Enter (10-250s)