23
VOICE DIALLER TEST
1.
Scroll through the top level Test Mode menu until
‘
VOICE DIALER TEST
’ is displayed and press .
2.
If the Voice Dialler is enabled it will be activated
and will follow the normal calling process. It will call
each enabled number in the dialling sequence the
set number of times with the main and Intruder alarm
messages will be replayed to the called number.
The test sequence may be cancelled either at the
Control Panel by pressing or by the call recipient
pressing the button on their telephone keypad.
3.
Press to exit Alarm Test and return to the top
level Test Mode menu.
REMOTE MANAGER TEST
1.
Scroll through the top level Test Mode menu until
‘
REMOTE MANAGER TEST
’ is displayed and .
2.
If the Remote Manager is enabled it will be activated
and a test call will be placed to the Remote Alarm
Monitoring Service provider.
If an acknowledgment signal is not received then a
failure message will be displayed on the screen. In
this event the system configuration for the Remote
Manager should be checked in conjunction with the
Alarm Monitoring Service provider.
3.
Press to exit Alarm Test and return to the top
level Test Mode menu.
FACTORY SETTINGS
USER SETUP
User Access Codes:
Users 1-6:
Not programmed
Master User:
1234
Latch Key messages:
Not programmed
SYSTEM SETUP
House Code:
Not programmed
Alarm Time:
ON, 180 seconds
Wirefree Siren:
ON
Jamming Detection:
OFF
Back Light:
10 seconds
Alarm Relay:
On Until Disarm
Zone Lockout:
ON
Remote Phone Control: OFF
Rings to Answer Phone: 6
Dialler Delay:
ON
Dial Method:
Tone/DTMF
Dialler Mode:
Voice Dialler
ZONE SETUP (Z1-10)
Name:
No Name
Type:
Intruder
Final Exit:
OFF
Chime:
OFF
Entry Delay:
Zone 1:
ON, 30 seconds
Zones 2-10: OFF
Part-Arm 1:
Zone 1-4: ON
Zones 5-10: OFF
Part-Arm 2:
OFF
Walk Through:
OFF
VOICE DIALLER SETUP
Phone Numbers:
Not programmed
Message Play Time:
70 seconds
Alarm Messages:
Not programmed
Call Routing:
All numbers disabled
Call Confirms:
1
Call Attempts:
3
FULL ARM SETUP
Exit Delay:
ON, 30 seconds
Entry Delay Beep:
ON
Exit Delay Beep:
ON
PART-ARM 1 SETUP
Exit Delay:
ON, 30 seconds
Entry Delay Beep:
ON
Exit Delay Beep:
ON
PART-ARM 2 SETUP
Exit Delay:
ON, 30 seconds
Entry Delay Beep:
ON
Exit Delay Beep:
ON
TIME & DATE
Time:
12:00:00
Date:
01/01/02
LATCH KEY SETUP
Status:
OFF
Selected User Setup:
OFF (all users)
Phone Numbers:
Not programmed
ANSWERPHONE SETUP
Status:
OFF
Greeting Message:
Not programmed
REMOTE MANAGER SETUP
Phone No:
Not programmed
Unit ID No:
Not programmed
Call Attempts:
3
