
Page 8
Tiles
™
Installation Manual
Base Feed Housing
Base Feed
Base Feed
Base Feed
All electrical connections to the
building electrical sources must be
wired by a licensed electrician.
WARNING:
Disconnect power before servicing.
WARNING:
All electrical connections must be fully
engaged and locked. A loose connection
can cause fire and/or electrical shock.
Base Power Entry, Direct Connect
1. The Base Power Entry plugs directly into
a Power Retro assembly at a Duplex
Outlet connection point.
2. Locate the appropriate connecting point
on the Frame. The Base Cover must be
opened to allow access.
3. Pass the Flex Conduit through the Base
Cover closest to the connecting point.
Place the Base Feed housing into posi-
tion, and slide between the brackets
toward the connection assembly. Ensure
that the Connector is fully engaged.
Press further until the spring tab clicks
into position.Return the Base Cover to
the closed position.
4. Return the Base Cover to the closed
position.
8-Wire Electrical, Base Feed Installation