Page 19
Tiles
™
Installation Manual
Worksurface Installation
Page 19
120
0
and 135
0
Worksurface Installation
Note: 120
0
and 135
0
Worksurfaces should be
installed before adjacent Worksurfaces.
1. Install Corner Bracket provided in the
corner at the desired height. Ensure all
bracket hooks are fully seated in slots.
2. Install Cantilever Bracket on Frame by
inserting the tab on the top hook of the
Cantilever Bracket into the Frame slot
at the desired height. Rotate bottom of
Cantilever Bracket into Frame to engage
all hooks.
3. Repeat procedure for Cantilever on
other side of the Worksurface.
4. Install Shoulder Screws at the back of
the Worksurface in pre-drilled holes.
Do not install Front Spacers yet.
5. Install Worksurface on the Cantilever
Brackets (one side at a time) by insert-
ing shoulder screws into keyhole slots
in rear of Cantilever Brackets. Push
Worksurface back until the Front Spac-
ers’ predrilled holes align with holes in
the Cantilever Brackets.
6. Install Front Spacers.
7. Install adjacent Worksurfaces if needed.
8. Level Worksurface by adjusting the lev-
eling screw at the front of the Cantilever
Brackets.
9. Attach ganging plates between adjacent
Worksurfaces.
Corner Bracket
Right hand Cantilever
Corner Bracket
Left hand Cantilever