Page 24
Tiles
™
Installation Manual
Supporting Pedestals and Lateral Files
Installation
Page 24
Supporting Pedestals Installation
1. All Pedestals (except Mobile Pedestals)
must attach to the supporting Worksurface.
2. Check the Pedestal height to ensure it
fits under its supporting Worksurface.
If it is not the correct height, adjust
the Glides on the Pedestal or raise the
Worksurface.
3. To install the Pedestal, first open the top
drawer. Unlock the Pedestal with the key
located inside the top drawer. Remove the
two (2) box drawers or the top file drawer,
depending on the Pedestal configuration.
NOTE: To remove the drawers, lift the dis-
lodging brackets on each side of the drawer
at the front of the suspensions, and pull
forward.
4. With the Pedestal in place, attach the
Mounting Screws at the front and rear of
the Worksurface and tighten.
5. Carefully re-insert the drawers into the
track.
NOTE: Always recheck the drawer for proper
operation after installing the Pedestal.
6. Check to ensure the lock is working
properly.
Keys
Lock
Dislodging Brackets
Mounting Screw
Location
Supporting Lateral Files
1. All supporting Lateral Files must attach
to the supporting Worksurface.
2. Check the Lateral File height to ensure
that it will fit under the supporting Work-
surface. If it is not the correct height,
adjust the Glides on the Lateral File or
raise the Worksurface.
3. To install the Lateral File, repeat the
above steps.