Page 20
Tiles
™
Installation Manual
Transaction Surfaces Installation
Page 20
Corner Transaction Surface
(same procedure as above)
1. Remove Top Tiles from both sides of
Frames.
2. Remove existing Frame Top Cap from
Frames and store for future use.
3. Secure Mounting U-shape Brackets
provided to the bottom of the Transaction
Surface, using pre-drilled holes.
4. Align Corner Transaction Surface on
Frames and push down until firmly seated.
5. Secure Rectangular Transaction Surface
Assembly to Frame, using self-drilling
screws provided. Use pre-drilled holes in
Brackets as template.
6. Replace Tiles on Frame.
Frame
Mounting Bracket
Self Drilling Screws
Transaction Surface
Mounting Brackets
Screws
Rectangular Transaction Surface
1. Remove Top Tiles from both sides of
Frame.
2. Remove existing Frame Top Cap from
Frame and store for future use.
3. Secure Mounting U-shape Brackets (pro-
vided) to the bottom of the Transaction
Surface, using the pre-drilled holes.
NOTE: Two (2) Mounting Brackets are re-
quired for 24” and 30”W Transaction Surface.
Three (3) Mounting Brackets are required for
36”, 42” and 48”W Transaction Surface.
Four (4) Mounting Brackets are required for
60”W Transaction Surfaces.
4. Center Rectangular Transaction Surface on
Frame and push down until firmly seated.
5. Secure Rectangular Transaction Surface
Assembly to Frame with self-drilling
screws provided. Use pre-drilled holes
in Brackets as template.
6. Replace Tiles on Frame.