214
100 confirmsconnectivity is set using the failtime and interval
keywords in the command “global” .
idle-timeout
<seconds_integer>
Disconnect if the PPPoE connection is idle for the specified
number of seconds.
0
ip
<address_ipv4mas
k>
The interface IP address and netmask.
Varies for
each
interface.
ipmac {disable |
enable}
Enable or disable IP/MAC binding for the specified interface. See
“ipmacbinding setting” and “ipmacbinding table” for information
about configuring IP/MAC binding settings.
disable
ipunnumbered
<address_ipv4>
Enable IP unnumbered mode for PPPoE. Specify the IP address
to be borrowed by the interface. This IP address can be the same
as the IP address of another interface or can be any IP address.
The Unnumbered IP may be used for PPPoE interfaces for which
no unique local address is provided. If you have been assigned a
block of IP addresses by your ISP for example, you can add any
of these IP addresses to the Unnumbered IP.
No default.
ip6-
address<address_i
pv6mask>
The interface IPv6 address and netmask. The format for IPv6
addresses and netmasks is described in RFC 3513.
::/0
ip6-default-life
<seconds_integer>
Enter the number, in seconds, to add to the Router Lifetime field of
router advertisements sent from the interface. The valid range is 0
to 9000.
1800
ip6-hop-limit
<hops_integer>
Enter the number to be added to the Cur HopLimit field in the
router advertisements sent out this interface. Entering 0 means no
hop limit is specified.
0
ip6-link-mtu
<mtu_integer>
Enter the MTU number to add to the router advertisements options
field. Entering 0 means that no MTU options are sent.
0
ip6-manage-flag
{disable | enable}
Enable or disable the managed address configuration flag in
router advertisements.
disable
ip6-max-interval
<seconds_integer>
Enter the maximum time interval, in seconds, between sending
unsolicited multicast router advertisements from the interface. The
valid range is 4 to 1800.
600
ip6-min-interval
<seconds_integer>
Enter the minimum time interval, in seconds, between sending
unsolicited multicast router advertisements from the interface. The
valid range is 4 to 1800.
198
ip6-other-flag
{disable | enable}
Enable or disable the other stateful configurationflag in router
advertisements.
disable
ip6-reachable-time
<unit_integer>
Enter the number to be added to the reachable time field in the
router advertisements. The valid range is 0 to 3600. Entering 0
means no reachable time is specified.
0
ip6-retrans-time
<unit_integer>
Enter the number to be added to the Retrans Timer field in the
router advertisements. Entering0 means that the Retrans Timer is
not specified.
0
Summary of Contents for freeGuard 100
