freeGuard 100 CLI User Manual
247
config user local
edit Admin7
set type password
set passwd abc123
end
This example shows how to display the list of configured local user names.
get user local
This example shows how to display the settings for the local user Admin7.
get user local Admin7
This example shows how to display the configuration for all local user names.
show user local
This example shows how to display the configuration for the local user Admin7.
show user local Admin7
Command History
Related Commands
•
config user group
•
config user ldap
•
config user peer
•
config user peergrp
•
config user radius
11.4 peer
Use this command to add or edit peer (digital certificate holder) information. You use the peers you
define here in the config vpn ipsec phase1 command if you specify peertype as peer. Also, you can
add these peers to peer groups you define in the config user peergrp command.
This command refers to certificates imported into the freeGuard 100. You import CA certificates using
the execute vpn certificate ca import command. You import local certificates using the execute vpn
certificate key import or execute vpn certificate local import commands.
Summary of Contents for freeGuard 100
