freeGuard 100 CLI User Manual
219
Example
This example shows how to add a secondary IP address and netmask of 192.176.23.180
255.255.255.0 to the internal interface. Also configure ping and https management access to this
secondary IP address.
config system interface
edit internal
config secondaryip
edit 1
set allowaccess ping https
set ip 192.176.23.180 255.255.255.0
end
end
This example shows how to display the settings for the system interface command.
get system interface
This example shows how to display the configuration for the system interface command.
show system interface
This example shows how to display the settings for the internal interface.
get system interface internal
If the interface mode is DHCP, the display includes Lease Expires, Acquired DNS1, Acquired DNS2,
and DHCP Gateway. If the interface mode is PPPoE, the display includes Acquired DNS1, Acquired
DNS2 and PPPoE gateway.
This example shows how to display the configuration for the internal interface.
show system interface internal
Command History
10.20 ipv6_tunnel
Use this command to tunnel IPv6 traffic over an IPv4 network.
Note
: This command is not available in Transparent mode.
Summary of Contents for freeGuard 100
