Freedom9 freeGuard 100, Command Line Interface Manual

Page: 233 / 310

226
This example shows how to display the settings for the modem command.
get system modem
This example shows how to display the configuration for the modem command.
show system modem
Command History
Related Commands
•
interface
10.24 replacemsg {alertmail | catblock | ftp | http | mail | spam} <message-type_str>
Use this command to change default replacement messages. Change replacement messages to
customize the content of alert email messages and to customize information that the freeGuard 100
adds to content streams such as email messages, web pages, and FTP sessions. The freeGuard 100
adds replacement messages to a variety of content streams. For example, if a virus is found in an
email message, the file is removed from the email and replaced with a replacement message. The
same applies to pages blocked by web filtering and emails blocked by spam filtering.
Command syntax pattern
config system replacemsg { alertmail | catblock | ftp | http | mail |
spam} <message-type_str>
set <keyword> <variable>
end
config system replacemsg <message-type_str>
unset <keyword>
end
get system replacemsg { alertmail | catblock | ftp | http | mail | spam}
[<message-type_str>]
show system replacemsg { alertmail | catblock | ftp | http | mail |
spam} [<message-type_str>]
system replacemsg <message-type_str> command keywords and variables
Keywords & Variables Description Default
buffer <message_str> Type a new replacement message to replace the
current replacement message. Depends on the
message type.
format {html | none |
text} The format of the message. html for HTTP replacement
messages, text for email messages. No default
header {8bit | http |
none} The format of the message header. Depends on the
message type.