freeGuard 100 CLI User Manual
291
execute ha synchronize {config| avupd| attackdef| weblists| emaillists| ca|
localcert| all | start | stop}
ha synchronize command keywords and variables
Keywords & Variables Description
config
Synchronize the freeGuard 100 configuration.
avupd
Synchronize the antivirus engine and antivirus definitions.
attackdef
Synchronize attack definitions.
weblists
Synchronize web filter lists.
emaillists
Synchronize email filter lists.
ca
Synchronize CA certificates.
localcert
Synchronize local certificates.
All
Synchronize all of the above.
start
Start synchronizing the cluster configuration.
stop
Stop the cluster from completing synchronizing its configuration.
Example
From the CLI on a subordinate unit, use the following commands to synchronize the antivirus and
attack definitions on the subordinate freeGuard 100 with the primary unit after the FDN has pushed
new definitions to the primary unit.
execute ha synchronize avupd
execute ha synchronize attackdef
Related Commands
execute ha manage
config system ha
14.8 modem dial
Dial the modem.
The dial command dials the accounts configured in config system modem until it makes a connection
or it has made the maximum configured number of redial attempts.
This command is effective only if the modem is in Standalone mode.
Summary of Contents for freeGuard 100
