Freedom9 freeGuard 100, Command Line Interface Manual

Page: 141 / 310

134
tag <tag_integer> Specify a tag for redistributed routes. The valid range for
tag_integer
is 0 to 4294967295.
0
This example shows how to enable route redistribution from RIP, using a metric of 3 and a route map
named rtmp2.
config router ospf
config redistribute ripset metric 3
set routemap rtmp2
set status enable
end
end
This example shows how to display the OSPF settings.
get router ospf
This example shows how to display the OSPF configuration.
show router ospf
config summary-address
Access the config summary-address subcommand using the config router ospf command.
Use this command to summarize external routes for redistribution into OSPF. This command works
only for summarizing external routes on an Autonomous System Boundary Router (ASBR). For
information on summarization between areas, see “config range” . By replacing the LSAs for each
route with one aggregate route, you reduce the size of the OSPF link-state database.
Command syntax pattern
config summary-address
edit <id_integer>
set <keyword> <variable>
end
config summary-address
edit <id_integer>>
unset <keyword>
end
config summary-address
delete <id_integer>
end