6
•
Use the following command to configure an interface to accept SSH connections:
config system interface
edit <name_str>
set allowaccess ssh
end
Where <name_str> is the name of the freeGuard 100 interface to be configured to accept SSH
connections.
For example, to configure the internal interface to accept SSH connections, enter:
config system interface
edit internal
set allowaccess ssh
end
•
Use the following command to configure an interface to accept Telnet connections:
config system interface
edit <name_str>
set allowaccess telnet
end
Where
<name_str>
is the name of the freeGuard 100 interface to be configured to accept Telnet
connections.
For example, to configure the internal interface to accept Telnet connections, enter:
config system interface
edit internal
set allowaccess telnet
end
Note
: Remember to press Enter at the end of each line in the command example. Also, type
endand press Enter to commit the changes to the freeGuard 100 configuration.
•
To confirm that you have configured SSH or Telnet access correctly, enter the following command
to view the access settings for the interface:
get system interface <name_str>
The CLI displays the settings, including the management access settings, for the named interface.
Other access methods
The procedure above shows how to allow access only for Telnet or only for SSH. If you want to allow
Summary of Contents for freeGuard 100
