freeGuard 100 CLI User Manual
77
protocol {tcp | udp}
The protocol, TCP or UDP, to be used by the forwarded
packets.
tcp
type {portforward |
staticnat}
The type of virtual IP to add or edit. Enter portforward to
add or edit a port forwarding virtual IP. Enter staticnat to
add or edit a static NAT virtual IP.
staticnat
Example
This example shows how to add a static NAT virtual IP named web_Server that allows users on the
Internet to connect to a web server on your internal network. The internet address of the web server is
64.32.21.34 and the real IP address of the web server on the internal network is 192.168.1.44.
config firewall vip
edit web_Server
set type staticnat
set extintf external
set extip 64.32.21.34
set mappedip 192.168.1.44
end
This example shows how to edit the static NAT virtual IP named web_Server to change the real IP
address of the web server on the internal network to 192.168.110.23.
config firewall vip
edit web_Server
set mappedip 192.168.110.23
end
This example shows how to add a port forwarding virtual IP that uses port address translation to allow
external access to a web server on your internal network if you do not have a separate external IP
address for the web server. In this example, the IP address of the external interface is 192.168.100.99
and the real IP address of the web server on the internal network is 192.168.1.93.
config firewall vip
edit web_Server
set type portforward
set extintf external
set extip 192.168.100.99
set extport 80
set mappedip 192.168.1.93
set mappedport 80
Summary of Contents for freeGuard 100
