freeGuard 100 CLI User Manual
135
get router ospf
show router ospf
Note:
Only the prefix keyword is required. All other keywords are optional.
summary-address command keywords and variables
Keywords & Variables Description
Default
advertise {disable |
enable}
Advertise or suppress the summary route that matches
the specified prefix.
enable
prefix
<address_ipv4mask>
Enter the prefix (IP address and netmask) to use for the
summary route. The prefix 0.0.0.0 0.0.0.0 is not allowed.
0.0.0.0 0.0.0.0
tag <tag_integer>
Specify a tag for the summary route. The valid range for
tag_integer is 0 to 4294967295.
0
Example
This example shows how to summarize routes using the prefix 10.0.0.0 255.0.0.0.
config router ospf
config summary-address
edit 5
set prefix 10.0.0.0 255.0.0.0
end
end
This example shows how to display the OSPF settings.
get router ospf
This example shows how to display the OSPF configuration.
show router ospf
Command History
Related Commands
•
config router access-list
•
config router prefix-list
•
config router route-map
•
get router info ospf
•
get router info protocols
Summary of Contents for freeGuard 100
