ValueLoader Administration
Configuring the ValueLoader
40
ValueLoader DLT VS80/DLT VS160 Tape Autoloader User Manual
• ValueLoader Operating Modes
• Updating firmware
To access the Configuration menu from the Home screen or main
menu, press the
[+]
or
[–]
button until “Configuration” appears on
the top line of the LCD screen. Press the
[Enter]
button and then
[+]
or
[–]
to access the available options. Press the
[Enter]
button to
execute the displayed menu option.
Resetting the
ValueLoader
3
This option resets the ValueLoader robotics and the tape drive
within the ValueLoader, forces a new cartridge inventory, and
clears any current error condition.
To access this option, follow these steps:
1
From the Home screen or main menu, press the
[+]
or
[–]
button
until “Configuration” appears on the top line of the LCD
screen.
2
Press
[Enter]
to select.
3
Press the
[+]
or
[–]
button until “Reset” appears on the LCD
screen.
4
Press the
[Enter]
button to reset the ValueLoader.
After initialization, the ValueLoader returns to normal operation
and displays the Home screen.
Changing the SCSI
ID
3
This option changes the SCSI ID the ValueLoader uses. The
ValueLoader operates as a single SCSI device with two separate
SCSI Logical Unit Numbers (LUNs): one LUN (0) is for the tape
drive, the other (1) is for the ValueLoader robotics.
The default SCSI ID is 5. You should only need to change the SCSI
ID if there are other devices on the SCSI bus with the same SCSI
ID.
Note:
This option is primarily used if the ValueLoader is in an
error state.
Summary of Contents for VALUELOADER DLT
