Installing the ValueLoader
Preparing the Host and Verifying the Connection
ValueLoader DLT VS80/DLT VS160 Tape Autoloader User Manual
17
For the VS160 ValueLoader, right-click the
QUANTUM DLT
VS160 SCSI Sequential Device
listing, click
Uninstall
, and then
click the
OK
button to confirm that you want to remove the
device.
5
Click the
Action
button in the upper-left corner of the
Computer Management dialog box.
6
Click
Scan for Hardware Changes
. Windows 2000 scans for the
drive. The drive appears under “? Other Devices” again.
7
For the VS80 ValueLoader, right-click the
BNCHMARK VS640
SCSI Sequential Device
listing and click
Properties
.
For the VS160 ValueLoader, right-click the
QUANTUM DLT
VS160 SCSI Sequential Device
listing and click
Properties
.
8
Select the
Drivers
tab.
9
Click the
Reinstall Driver
or
Update Driver
button.
10
When the Upgrade Device Driver Wizard appears, click the
Next
button.
11
Click
Tape Drives
and then click the
Next
button.
12
Click the
Have Disk
button. Type the path to where you have
saved the device drivers on your system, then click the
OK
button.
13
Click the
DLT ValueLoader Tape Drive
entry and click the
Next
button.
14
Click the
Next
button again to install the driver.
15
Click the
Finish
button.
16
Close the
Device Properties
dialog box.
17
The drive appears in Device Manager under Tape Drives as
DLT ValueLoader Tape Drive
and is now ready to use.
Note:
Depending on the status of your system and the exact
path taken to select the device driver, the driver may
appear as
Dltvstp.inf
.
Summary of Contents for VALUELOADER DLT
