Freecom VALUELOADER DLT, User Manual

Page: 60 / 90

ValueLoader Administration
Running the ValueLoader System Test
46 ValueLoader DLT VS80/DLT VS160 Tape Autoloader User Manual
8
If you exported a data cartridge to make room for the code
upgrade cartridge, be sure to import the cartridge to its original
slot. See Importing Cartridges on page 28 for instructions.
Using SCSI
3
The Web site has the files and instructions necessary to update
drive and ValueLoader firmware via SCSI. Refer to our Web site
for details.
Running the ValueLoader System Test
3
The System Test option cycles the ValueLoader through the
process of loading, calibrating, and unloading all cartridges in the
carousel. Running a System Test verifies the operational
soundness of both the ValueLoader and tape drive. The System
Test continues indefinitely until you press the
[Cancel]
button. All
regular backup and restore operations are suspended while a
System Test is in progress.
To run a System Test:
1
From the Home screen or main menu, press the
[+]
or
[–]
button
until “Diagnostics” appears on the top line of the LCD screen.
2
Press the
[Enter]
button to select. “System Test” appears on the
LCD screen.
3
Press the
[Enter]
button to begin the test.
Note:
After a firmware update, the firmware revision
displayed on the LCD is not updated until the
ValueLoader is power cycled.
Note:
At least one cartridge must be in inventory before
running System Test.