Freecom VALUELOADER DLT, User Manual

Page: 62 / 90

ValueLoader Administration
Retrieving Information About the ValueLoader
48 ValueLoader DLT VS80/DLT VS160 Tape Autoloader User Manual
2
Press the
[+]
or
[–]
button until “View Event Log” appears on
the LCD screen. The LCD screen also displays the quantity of
errors and events currently stored in the event log.
3
Press the
[Enter]
button to access the most recently logged
event.
4
Press the
[+]
or
[–]
button to display each event in the log.
5
Press
[Cancel]
when done.
Firmware Revision
3
This option displays the revision of the firmware currently
installed in the ValueLoader.
To use this option, follow these steps:
1
From the Home screen or main menu, press the
[+]
or
[–]
button
until “Information” appears on the top line of the LCD screen.
2
Press the
[Enter]
button to access the available options.
3
Press the
[+]
or
[–]
button until “Firmware Rev” appears on the
LCD screen.
The LCD screen displays the revision of the firmware currently
installed in the ValueLoader.
4
Press
[Cancel]
when done.
Note:
The tape drive and ValueLoader firmware are a single
image, but displays as three firmware numbers on the
front panel.
Note:
After a firmware update, the firmware revision
displayed on the LCD will not be updated until the
ValueLoader is power cycled.