Freecom VALUELOADER DLT, User Manual

Page: 43 / 90

Operating the ValueLoader
Using Cartridges
ValueLoader DLT VS80/DLT VS160 Tape Autoloader User Manual 29
4
Press the
[+]
or
[–]
button until “Import” appears on the LCD
screen. Press
[Enter]
to select.
5
Press the
[+]
or
[–]
button until the desired slot number appears
on the LCD screen and press the
[Enter]
button. You are not
given the option to import a cartridge to an occupied slot.
6
When “Insert Cartridge Slot” appears on the LCD screen and
the Import/Export slot opens, insert the desired data cartridge
into the Import/Export slot so that the write-protect switch is
facing out from the ValueLoader and toward the right.
7
Repeat steps 5 and 6 as needed for additional cartridges.
8
Press the
[Cancel]
button when you have finished importing
cartridges.
9
Verify that the LCD screen shows that the desired slots have
cartridges installed.
Figure 12 Importing a
Cartridge
Exporting
Cartridges
2
This option moves a cartridge from a specific slot to the Import/
Export slot. To export one or more cartridges from the
ValueLoader, follow these steps:
Note:
If you are using the Operator’s Panel to clean the
drive, import the cleaning cartridge only when the
front panel indicates that cleaning is needed. You
may keep a cleaning cartridge in the ValueLoader if
the backup software can manage the drive cleaning.