Freecom VALUELOADER DLT, User Manual

Page: 61 / 90

ValueLoader Administration
Retrieving Information About the ValueLoader
ValueLoader DLT VS80/DLT VS160 Tape Autoloader User Manual 47
The “Test Count” displays the number of load-calibrate-unload
cycles that have been completed during the test.
4
Press the
[Cancel]
button to end the test.
Retrieving Information About the ValueLoader
3
The Information menu provides access to information about the
ValueLoader, including the cycle count, event log, and firmware
revision.
Cycle Count
3 This option displays the total system cycle count, incrementing
each time a tape is loaded into the drive or exported from the
ValueLoader.
To use this option, follow these steps:
1
From the Home screen or main menu, press the
[+]
or
[–]
button
until “Information” appears on the top line of the LCD screen.
2
Press the
[Enter]
button to access the available options.
3
Press the
[+]
or
[–]
button until “Cycle Count” appears on the
LCD screen.
The LCD screen displays the total cycle count.
4
Press the
[Cancel]
button when done.
View Event Log
3
This option provides access to the most recent ValueLoader errors
and events (see table 5 on page 63 for a description of error codes).
From the Home screen or main menu, press the
[+]
or
[–]
button
until “Information” appears on the top line of the LCD screen.
1
Press the
[Enter]
button to access the available options.