ValueLoader Administration
Updating Firmware
44
ValueLoader DLT VS80/DLT VS160 Tape Autoloader User Manual
To access this option, follow these steps:
1
From the Home screen or main menu, press the
[+]
or
[–]
button
until “Configuration” appears on the top line of the LCD
screen.
2
Press the
[Enter]
button to select.
3
Press the
[+]
or
[–]
button until “Autoload Mode” appears on
the screen. The second line on the LCD screen displays the
current status, either “On” or “Off.”
4
Press the
[Enter]
button. The LCD screen indicates whether you
are about to turn Autoload Mode on or off.
5
Press the
[Enter]
button to accept the change to Autoload mode
or press
[Cancel]
to exit and not save the changes.
Updating Firmware
3
Using a Firmware
Upgrade Tape
3
This option performs a firmware update for the ValueLoader using
a firmware upgrade cartridge.
Caution:
Regardless of the firmware update technique, DO
NOT POWER CYCLE OR RESET THE
AUTOLOADER DURING THE UPGRADE
PROCESS. Doing so could cause the ValueLoader to
become inoperable.
Note:
This code update operation assumes that the upgrade
tape is imported as part of this procedure. Do not import
the firmware update cartridge before starting this
procedure.
Summary of Contents for VALUELOADER DLT
