Freecom VALUELOADER DLT, User Manual

Page: 55 / 90

ValueLoader Administration
Configuring the ValueLoader
ValueLoader DLT VS80/DLT VS160 Tape Autoloader User Manual 41
To access this option, follow these steps:
1
From the Home Screen or main menu, press the
[+]
or
[–]
button until “Configuration” appears on the top line of the
LCD screen.
2
Press the
[Enter]
button to select.
3
Press the
[+]
or
[–]
button until “Change SCSI ID” appears on
the LCD screen. The second line displays the current SCSI ID.
4
Press the
[Enter]
button. The second line on the LCD screen
displays “New ID:”.
5
Press the
[+]
or
[–]
button until the desired SCSI ID is displayed.
6
Press the
[Enter]
button. The LCD screen displays “Please
Cycle Power.”
7
Turn off the ValueLoader. After a few seconds, turn it back on
again.
The selected SCSI ID is now in effect.
Note:
The ValueLoader will not respond to input from the
Operator ‘s Panel until the power has been cycled.
Note:
If you changed the SCSI ID, you may also need to cycle
power on the host server and reconfigure your backup
software before you can use the ValueLoader. Consult
your hardware and software manuals for more
information.