Freecom VALUELOADER DLT, User Manual

Page: 26 / 90

Installing the ValueLoader
Connecting the SCSI and Power Cables
12 ValueLoader DLT VS80/DLT VS160 Tape Autoloader User Manual
Figure 7 Sliding the
ValueLoader into the
Rack Slot, Securing
Mounting Bracket
Connecting the SCSI and Power Cables
1
To connect the SCSI and power cables to the ValueLoader, follow
these steps:
1
Shut down and turn off the selected server. Turn off all
attached accessory devices, such as printers and other SCSI
devices. Remove the power cables from the server and all
attached accessories.
2
Attach one end of the SCSI cable (included in the accessory kit)
to one of the connectors on the rear panel of the ValueLoader.
(See figure 8 .)
Caution:
Failure to remove the power cables from these
devices could result in damage to the
ValueLoader.